BOOT SCSI avec adaptec 2904 et disque dur

  • Auteur de la discussion DZTCiD-
  • Date de début

DZTCiD-

Nouveau membre
salut j ai une autre carte mere
une P3V4X
avec une une carte scsi PCI adaptec 2904
j y ai branché mon disque dur 4 go scsi
en ide j ai mis un cdrom
j ai booter au debut avec mon cdrom contenant mon cd win 2000
tout fonctionne j ai installé win2000 sur le dd scsi, ensuite je reboot le pc
je vais dans le bios
pour annuller le 1rst boot en cdrom
et j ai mis scsi en premier

je suis au regret de vous dire que sa marche pas
en plus quand je veux utilisé un disquette de demarage win98
la disquette detecte le cdrom ide un autre cdrom scsi plex 4220
mais pas le disque dur

on m a dis qu avec ma config c est impossible de booter en scsi

est ce vrai

merci de me repondre
 

Nesskiel

Expert
oui

The controllers in question, do not support the option of booting to any SCSI device.

These controllers, do not have a BIOS and by design, there is no BIOS option for these controllers.
A BIOS, is an optional ROM (Read Only Memory) feature, that will allow an OS to boot or load from a SCSI device.

The setup option mentioned, in your systems CMOS, is designed for either an IDE bootable CDROM. If you have a system BIOS option to prioritize the SCSI controller as the boot controller, this will only work if your SCSI controller has a BIOS to boot from.

The SCSI controller must have BIOS in it to boot properly. The SCSI controllers in question do not have any BIOS option nor are they capable of BIOS upgrade options.

Note: If you are looking for a SCSI controller that's capable of booting (hard-disk or CDROM), you might want to acquire the AHA-2940AU or higher end controllers like the Adaptec SCSI Card 29160N.

A temporary work around or optional method for booting, would be to create a DOS Bootable diskette with the correct drivers. This would allow the booting to the diskette and then give you access to the specific devices. This method, however, is only a temporary work around and still does not allow the direct booting from a SCSI device attached to one of the above controllers.
 
Vous devez vous inscrire ou vous connecter pour répondre ici.
Derniers messages publiés
Statistiques globales
Discussions
730 098
Messages
6 717 065
Membres
1 586 286
Dernier membre
petitangebleu1977
Partager cette page
Haut