Résolu Ordinateur freezes recurrents

YutoTwinky

Nouveau membre
Bonjour à tous, je vous contacte car j'ai un soucis avec mon pc fixe Je l'ais monté il y a 4 ans (les meilleurs composants à l'époque donc cela à vieille correctement, i7, 6 Go de rams etc).Le soucis est que désormais, mon ordinateur crash sans raison ... Je me suis dis que c'étais la carte graphique qui était trop faible en jeu donc je l'ais overclocké un peu mais apparemment cela ne viens pas de la car rien n'est arrangé. Hier en allumant mon ordinateur, la souris avec comme des minis freezes et pourtant aucun logiciel n'étais allumé, au bout de quelques minutes BAM CRASH.J'ai utilisé le "WhoCrashed" et souhaiterais savoir si cette erreur vous dis quelques choses. (Lors du crash, ma ram était à 50% d'utilisation alors qu'il n'y avais rien d'allumé)"

On Fri 05/09/2014 18:25:00 GMT your computer crashed
crash dump file: C:Windowsmemory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x101 (0x19, 0x0, 0xFFFFF880009B2180, 0x4)
Error: CLOCK_WATCHDOG_TIMEOUT
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. "



Je vous met également tous les autres crash que j'ai eu au cas où :

"On Sun 31/08/2014 16:38:35 GMT your computer crashed
crash dump file: C:WindowsMinidump83114-21278-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x101 (0x19, 0x0, 0xFFFFF880009B2180, 0x4)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:Windowssystem32ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 26/08/2014 13:15:22 GMT your computer crashed
crash dump file: C:WindowsMinidump82614-27549-01.dmp
This was probably caused by the following module: hal.dll (hal+0x1281
Bugcheck code: 0x9C (0x0, 0xFFFFF88002FDDC70, 0x0, 0x0)
Error: MACHINE_CHECK_EXCEPTION
file path: C:Windowssystem32hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal machine check exception has occurred.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Wed 20/08/2014 14:56:18 GMT your computer crashed
crash dump file: C:WindowsMinidump82014-21855-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x4ADB3C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8006A85618, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:Windowssystem32ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 12/08/2014 12:24:56 GMT your computer crashed
crash dump file: C:WindowsMinidump81214-21356-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x101 (0x19, 0x0, 0xFFFFF880009B2180, 0x4)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:Windowssystem32ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Mon 09/06/2014 16:59:09 GMT your computer crashed
crash dump file: C:WindowsMinidump60914-23618-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x101 (0x19, 0x0, 0xFFFFF880030F9180, 0x6)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:Windowssystem32ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. "

Je vous remercie d'avance pour vos réponses et espère en savoir d'avantage.
 

jacktara

Modérateur
Staff
Salut,

overclocker sa CG parce que le PC plante ne me semble pas être la meilleur solution.
Check tes températures en utilisation et dis nous ce qu'il en est.
Utilise Hardware monitor si tu n'as rien pour vérifier.


Donne nous aussi la liste complète des composants de ton ordinateur.
Fait les majs windows et antivirus.
Vérifie que tous tes drivers sont à jour aussi.
www.touslesdrivers.com

 

YutoTwinky

Nouveau membre
Bonjour Jacktara et merci pour cette réponse si rapide.
En utilisation tous mes composants ont une température convenable, mise a pars ma carte graphique qui peux atteindre les 100 degrés très facilement (même avant overclockage).
Mes drivers et maj windows sont toutes ok.

Voici mes composants :

Intel Core i7 920 Cadencé à 2.67 GHz
ASUSTeK Computer INC. Rampage II GENE Rev 2.xx
6 Go de mémoire totale de type DDR3 KINGSTON
ATI Radeon HD 4890 (elle se fait vieille...)
Windows 7 Edition Intégrale ‎(X64)‎ Service Pack 1


Actuellement il n'y a que le forum qui est utilisé et je suis a 70 degrés sur ma CG en sachant que j'ai vraiment un très bon ventirad dans mon boitier... je ne sais pas :(
 

jacktara

Modérateur
Staff
Ok ben c'est sure que ça vient de là alors.
70° c'est vraiment pas bon, surtout s'il n'y a rien qui tourne. Et 100°, ben c'est encore pire.
Annule tous les overclock pour commencer.
Désinstalle tous les pilotes et réinstalle la, vérifie que le flux d'air n'est pas obstrué et que la cg n'est pas recouverte de poussière. :merci:
 

YutoTwinky

Nouveau membre
Voila, donc j'ai démonté ma CG et il y avait plein de poussières (je lave souvent mon PC mais je n'enlève pas les composants), j'y ais été carrément au compresseur et une bonne dose de poussière est partie (pareil pour le ventilo du proco). J'ai désinstallé réinstallé mon pilote de CG et maintenant la température de ma carte graphique affiche 60 Degrés, soit 10 degrés de gagné *-*. Je tiens déjà à te remercier pour ce gain phénoménal, penses tu que le problème est encore présent ?
 

jacktara

Modérateur
Staff
Tu as combien d'écrans?
C'est quoi ton alimentation?

Je ne connais pas trop la 4850 et je ne trouve pas les températures normalement attendues de cette carte graphique. Ca me parait quand même beaucoup encore.
Tu est en france ou dans les dom tom?
 

YutoTwinky

Nouveau membre
J'ai deux écrans, mon alim est une 750W de chez Corsair. J'habite en Francais, je suis désormais à 90 degrés en jeu et avec l'antivir d'allumé, ça chauffe ma pièce ...
 

jacktara

Modérateur
Staff
90° c'est beaucoup trop. En ne branchant qu'un seul écran tu as le même problème?
 

jacktara

Modérateur
Staff
Meilleure réponse
Sérieux. :o
C'est énorme!! Tu peux la garder pour l'hiver dans ce cas et en prendre une autre pour le reste de l'année. :merci:
 

YutoTwinky

Nouveau membre
Oui je penses que je vais changer de CG, en tout cas merci beaucoup pour vos réponses j'ai gagné quelques degrés en dépoussiérant réellement mon pc :) !
 
Vous devez vous inscrire ou vous connecter pour répondre ici.
Derniers messages publiés
Statistiques globales
Discussions
730 098
Messages
6 717 049
Membres
1 586 282
Dernier membre
Yannick3553
Partager cette page
Haut